GUANGZHOU B.D NEW BUILDING MATERIALS TECHNOLOGY CO.LTD
Website: www.ovsion.com
13302568785 (WeChat same number) Miss Li
Fixed call: 020-87391896
E-mail:2517172559@qq.com
Address: Room 1413, 14th floor, Dongjian building, 503 Dongfeng Middle Road, Yuexiu District, Guangzhou, Guangdong, China
BD-19 interface agent
Composition and performance
Concrete interface agent is a kindPolymer modified cement mortar,Can enhance the grass-rootsAdhesion,Has good water resistance, heat resistance, freeze-thaw resistance, and avoids plasteringEmpty drum、The phenomenon of shelling, instead of artificial chisel processing, saves time and effort. It is mainly used for interface treatment of concrete base plaster and surface treatment of large blocks.
Executive standard
This product complies with the "JC/T 907-2002" standard
Application area
The Interface agent is suitable for surfaces such as tiles, glass mosaics, polished tiles, vitrified tiles, marble, terrazzo, brush stone, concrete, cement, and mortar.
Range of use
1 Cement self-leveling interface treatment: It is used for the base layer treatment before the cement self-leveling ground construction to improve the self-leveling and base layer adhesive strength.
2 new and old concrete connection: used for construction joints, beam and column reinforcement, old foundation transformation and other new and old concrete connections, shear strength increased by 3 times.
3 smooth base plaster: replace the smooth concrete surface of the alkali washing oil, artificial hair cutting and other processes, can increase the adhesion of more than 6 times.
4 Brick paving: interface coating, or mortar with high adhesion, directly paving large brick plates, and paste new tiles on old tiles
5 concrete repair and surface protection: can be used for surface protection of concrete and steel, to prevent deterioration and corrosion.
(6) Oily, sand-bearing base treatment: Bases with sanding or a small amount of oil can be coated and plastered directly.
7 Waterproof, moisture proof and anticorrosive: It can be applied in the moisture base layer, and it can be used as a moisture barrier layer of oil paint, and it is firmly bonded with the polyurethane coating.
Technical indicators
(Refer to the standard JC/T 907-2002 <Concrete Interface Agents>)
Items | Indicators | |||
Itype | IItype | |||
Shear bond strength MPa | 7d | ≥1.0 | ≥0.7 | |
14d | ≥1.5 | ≥1.0 | ||
Tensile bond strength MPa | Unprocessed | 7d | ≥0.4 | ≥0.3 |
14d | ≥0.6 | ≥0.5 | ||
Soaking | ≥0.5 | ≥0.3 | ||
Heat treatment | ||||
Winter melting cycle | ||||
Alkaline treatment | ||||
Open time min | ----- | ≥10 | ||
Note: The open time of I-type products shall be determined by both the supplier and the buyer according to the needs of the project. |
Product packaging
Specifications: 25kg/barrel
Recommended News
- 18-03-21 Ground hardener (carborundum) standard implementation process
- 18-02-28 What is the difference between the metal and nonmetal in the diamond wear-resistant floor?
- 17-12-08 How much is a square of self-leveling? Self-leveling price?
- 18-03-30 The first choice of concrete sealing and curing agent for dustless ground
- 17-12-08 Emery primary color workshop floor case
- 17-11-30 How to choose a waterproof coating product?
- 17-11-30 The key to difficult construction of wear-resistant floor is process and technology
- 17-11-27 Seven errors in the use of tile adhesives